How To Light The Pilot On A Furnace - This video is part of the heating and cooling series of training videos made to accompany my web. However, if not in the “on” position, pop the breakers back..
Turn Back On The Power, Then The Main Gas Supply.
This should light the furnace pilot light. Once you've exposed the furnace burner assembly, look toward the bottom and you should see a dial (usually red) with markings on it that say on, off and pilot. that dial is part of the gas control valve, and once you've. If your old gas furnace has a standing pilot, follow a standard procedure to relight the pilot light if it goes out.
Once The Gas Has Had Time To Dissipate, Turn The Knob To Pilot. Then, Hold Down The Reset Button And Bring The Flame Of A Long Lighter Close To The Pilot Light Opening.
However, if not in the “on” position, pop the breakers back. Place the lit match or ignited lighter tip at the pilot while depressing and holding the reset button or depressing the knob, as appropriate. Turn the gas valve counterclockwise.
How To Light The Pilot Light On A Honeywell Vr8200 Set Your Thermostat To The Lowest Setting And Unplug Your Furnace.
This one covers how to light the pilot on the gas furnace. A standing pilot light is a small flame positioned next to the main burner that is constantly burning. To reset the pilot light on a furnace, you can look for instructions in the user manual.
Turned Off Gas, Thermostat And The Power Switch On Side Of Furnace, Turned All Back On And Put Covers Back On, Still No Pilot Light.
Wait five minutes for any gas remaining in the furnace to vent. It has the settings on, off and pilot. Then, wait at least 5 minutes before proceeding to the next step.
Switch Off The Gas By Turning The Gas Control Valve To The Off Position.
Call cranney home services for gas furnace repair. If it's on, you should be able to see a small flame. This should light the furnace pilot light.
