How To Take Xbox 360 Apart - This is a video tutorial on how to take apart an xbox 360 gaming console. These clips are in the following locations:.
This Instructable Requires Overcoming The Fear Of Playing With The Innards Of A $350 Piece Of Equipment.
All you need to get started are a t10 torx screwdriver, a small flathead screwdriver, and an xbox 360 console. Hold power button for 3 seconds hold power button in for 3 seconds to discharge any power still stored in the systems components. There are four clips on the front of your xbox 360 that hold the top half and the bottom half of the case together;
One On Either Side Of The Disk Tray.
Then unclip the console from the front and back. I’ve put together a video here to show you. Rotate the xbox to the left to locate the clip connecting the front panel to the body.
Now We Need To Remove The Top And Bottom Mesh.
Xbox 360 take apart guide: This may require wiggling the spudger. Xbox 360 take apart guide:
Heat Sinks That Will Cool Your Motherboard.
Take apart the xbox 360. If need be, look up my previous guide on xbox 360 disassembly by selecting my username then browsing my guides. Okay here is how you take a xbox slim apart for you who do not understand i will put a text tutorial step 1 get three tools philips flat head,tork 10 screwdriver,regular screwdriver step 2 use the flat head stick it in the vent slot then pull to the left to get the black vents off
These Clips Are In The Following Locations:
You will remove the hard drive by pressing button on the hard drive and. To repair your xbox 360 s, use our service manual. Pull the top of a clip toward you while holding the bottom of the clip to release them.
